I was asked about this a while ago by an operator who wanted to spray a very specific route on an orchard.
The facility does exist in the XAG One App to create a custom route, rather than the traditional spray pattern. If it works, the video below should show you how to do it!
Note: Some of the screens may have changed slightly in recent updates but the process is still the same.
I didn’t have a drone connected when I did this so I could follow through to the actual flight. Once you have created your route, leave the route page selected in the Edit Field and go straight to “Start Operation”. This should allow you to fly the route.
Let me know if you have any questions and I can try to grab another video when I am out on the next training course.
